Pools, Hot Tubs & Aquariums
The hidden TRUTH is...other epoxy, paints and coatings, dry from the bottom up, causing hydration(water, air and metals airing outward), pushing out the new coating that has been applied causing pin holes to appear, and the new coating to delaminate, flake, peel or blister. Our pool coatings insulate your pool keeping it warmer and will Never Peel, Flake or Chalk!
This is why other products FAIL! Other coatings require you to wait 5 to 7 days before filling with water. ArmorGuard Coatings dry from the top down eliminating pin holes and bonding to the surface permanently with a 14,000 psi chemical bond strength, unmatched by other coatings. ArmorGuard Coatings are ready to be filled with water after only 36-48 hours.
Benefits
- Odorless & Non-Toxic
- NO VOCS
- 100% waterproof
- Chemical resistant
- Easy 1 Coat Application
- Reduces chemical usage
Fiberglass Pool Resurfacing
Fiberglass Swimming pools can be very dangerous, when their gel coat delaminates, the toxic fiberglass resins used to make the shells outgas and delaminate causing fiberglass fibers to float around in your pool, getting into your lungs or eyes causing irritation or other medical problems. The other problems with these pools are that after the gel coat wears away, the pools do not hold water. ArmorGuard Coatings are used to coat these problem pools to prevent out gassing, delaminating and leaking.
Get Plastered?
Plaster and other mortar based coatings are a thing of the past, plaster or concrete is made with water and breaks down with water, not to mention plastering your pool is costly and leaves a rough texture causing blistering of the feet. Concrete and Plaster is porous leading the growth algae, and fungi. ArmorGuard Pool Coating System is not made with water and is exclusive to microban – a built in hard surface anti-microbial that will resist the growth of algae or fungi.
Don't Flake
Pebble tech or other related coatings delaminate leaving a gritty feeling on your feet when the stones pop out, this process also promotes algae growth and costs $$$$. ArmorGuard Speckle Flake System when applied does not delaminate and fully encapsulates the flakes to prevent popping out.
Our Pool Products
ArmorGuard Topcoat Kit
ArmorGuard, the "Natural Choice" Epoxy Coating is easily roller applied. No special equipment is needed.
ArmorGuard is chemical, stain resistant and will seal water out permanently, not redirect water to another area.
Kit includes: 1lb of ArmorGuard Cleaner and a 3 gal. unit of color top coating 3 Gallon Kit (coverage 300-350 s.f). Priced affordably at $397.00
