Flooring & Decks
ArmorGuard® is easily applied in 2 steps; first clean the surfaces with ArmorGuard Cleaner, then roll apply our epoxy floor coat,that's it!
Our epoxy is applied at 15 mils per coat and does not require a primer coat first, or a sealer after. ArmorGuard leaves a semi gloss finish and does not require a sealer.
Save $$$
Most other paints or coatings require 2 to 3 applications to get the recommended finish you require, this means more product is needed, extended down time and additional labor costs. ArmorGuard Floor Coating is applied in 1 application at 15 mils, thus saving you labor, down time and $$$$.
ArmorGuard® contains NO toxic organic compounds or heavy metals and is easily roller applied. No special equipment is needed. Our product applies at approx 15 mils per coat; unlike other interior coatings that apply at 2-5 mils at best.
ArmorGuard® is an industrial waterproof protective coating which is a 100% solid thermosetting epoxy made from soybeans, beans and peanuts, with titanium and flex enhancers added, for better durability and flexibility.
Benefits
- Odorless & Non-Toxic
- NO VOCS
- Easy 1 Coat Application
- Permanent Bond Strength
- 100% Waterproof
- Self-Leveling
"Armorguard chemically cures from the top down etching its way into the surface sealing pores, this is why primer is not required. "
Don't Be Fooled
Other Coatings or paints that claim to be 100 % solid and apply at 5, 10 or 15 mils may not necessarily be the truth. Coatings or paints that are mixed with solvents such as Acetone, MEK, etc. will out gas and breakdown when drying. Many times the Resin is 100% solid, but when mixed with their hardener is only 50% – 70% Solid, This means when you apply their coating at 10 mils the coating or paint will shrink leaving you 5 mils to 7 mils per application. ArmorGuard Coatings are 100% solid, and are solvent less, this means you apply our coating in 1 application at 15 mils.
New* Floor Coating Demo
Do It Once!
Once applied, ArmorGuard is not going anywhere; ArmorGuard has a 14,000 psi chemical bond strength and will etch itself into the surface up to ¼ inch. ArmorGuard Floor Coatings are a permanent solution to a never ending situation, why coat every 1, 3 or 5 years? With our floor coating you can do it right, ONCE!
Our Coatings are Easy to Use... Satisfaction Guaranteed!
Take advantage of our Free Shipping Limited Time Offer!
Our Floor Products
- ArmorGuard Concrete Cleaner
- ArmorGuard Trowel Mix
- ArmorGuard Floor Coating
- EZPour Epoxy
- Clearpoxy 10 Floor Sealer
ArmorGuard Concrete Cleaner
Our product is a combination heavy duty cleaner (which removes oils, fats and waxes unlike acids), etches the concrete, and the cleaner aspect of the product enhances the second part of the formula by reducing the surface tension and allowing it to penetrate deeper.
1 lb. unit $37.00
2 lb Unit $67.00
ArmorGuard Trowel Mix
Fiber Reinforced Polymer Trowel Mix that is 10 times stronger than concrete and will permanently repair cracks, holes or degraded areas, our trowel mix is also used to set tile permanently.
Read more →
1.5 Gallon Kit - $232.00
3 Gallon Kit - $387.00
ArmorGuard Floor Coating
Product Description:
2 components, 100% Solids, Self- Leveling all-purpose epoxy floor coating, applies at approximately 20 mils finish thickness. Most popular coating to due to extensive coverage rates and thickness.
Priced affordably at:
1.5 Gallon Kit $237.00 (coverage 150-175 s.f, includes .5lb of ArmorGuard Cleaner and a 1.5 gal. unit of color top coating)
3 Gallon Kit $377.00 (coverage 300-350 s.f, includes 1lb of ArmorGuard Cleaner and a 3 gal. unit of color top coating)
EZPour Epoxy
Product Description:
A Crack Filler. 2 components, 100% Solids, all-purpose pourable, self-leveling, non-shrinking epoxy formulation.
3 gallon unit $377.00
Clearpoxy 10 Floor Sealer
Product Description:
2 components, 100% Solids, Self- Leveling, High Performance Clear Coating, applies at approximately 10 mils finish thickness. Provides a durable, light reflective floor with excellent adhesion qualities.
1.5 gallon Kit $127.00
3 gallons Kit $227.00
Completed Flooring Projects
Permanent Waterproofing
Strengthen your floors permanently!
Save Time & Money
ArmorGuard Floor Coating is applied in 1 application!
Indestructible Flooring
ArmorGuard has a 14,000 psi chemical bond strength!
